Keurig Coffee Makers K 90 Elite Manual

The Keurig K 90 Elite is a single-serve coffee brewing system designed for home or office use. It features a large water reservoir, multiple brew size options, a programmable auto-off function, a removable drip tray for travel mugs, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Brewing Coffee 7. Maintenance and Cleaning 8. Programming Settings 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brew Chamber, Water Reservoir, Control Panel, Drip Tray, Power Cord, and K-Cup Pod Holder.

Feature	Description
Large Water Reservoir	Holds up to 48 oz for multiple brews without refilling
Brew Size Options	Select from 6 oz, 8 oz, or 10 oz cup sizes
Programmable Auto-Off	Automatically turns off after 2 hours (default)
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches tall
Energy Efficient	Energy Star certified
Brew Temperature Control	Heats water to optimal 192°F for brewing
Power Button	Turns brewer on/off
Brew Button	Initiates brewing cycle
Brew Size Selector	Cycles through available cup sizes
Add Water Indicator	LED light alerts when reservoir is low

Unpacking and Setup

Remove all packaging materials. Place brewer on a stable, level surface.

Remove packaging: Take brewer and all accessories out of box.
Wash removable parts: Wash water reservoir and drip tray with warm, soapy water.
Fill water reservoir: Lift reservoir, fill with fresh cold water, and replace.
Plug into power: Connect power cord to outlet (120V AC).

WARNING! Do not use without water. Ensure brewer is on a heat-resistant surface away from edges.

First-Time Use

Prime the brewing system before first brew.

Power on: Press POWER button; brewer will begin heating.
Prime system: Without a K-Cup, place a mug on drip tray and press BREW button to run water through system.
Repeat priming: Perform 2-3 cycles until water runs clear.
Insert K-Cup: Lift handle, insert K-Cup pod, close handle firmly.
Select brew size: Use BREW SIZE button to choose cup size (6, 8, or 10 oz).
Brew: Press BREW button to start cycle.

CAUTION! Water and brewed coffee will be hot. Keep hands clear during brew cycle.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D.
Water Reservoir Capacity: 48 oz.
Brew Sizes: 6 oz, 8 oz, 10 oz.
Power: 120V AC, 60Hz, 1470W.
Brew Time: Under 1 minute per cup.
Weight: 8.5 lbs.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited warranty.

Controls and Indicators

Control Panel: POWER button, BREW button, BREW SIZE selector, ADD WATER indicator.

Indicator Lights: Power (green), Heating (flashing green), Ready (steady green), Add Water (red).

Settings: Auto-off programmable from 0 to 5 hours. Brew temperature preset to 192°F. Brew strength not adjustable on this model.

Brewing Coffee

Brew single cups using Keurig K-Cup pods.

Ensure brewer is on and ready (green light steady).
Lift handle to open brew chamber.
Insert K-Cup pod (any variety).
Close handle firmly until it clicks.
Place mug on drip tray (remove drip tray for travel mugs).
Select brew size with BREW SIZE button.
Press BREW button; cycle completes automatically.
Lift handle to eject used pod into disposal bin.

Tip: For stronger coffee, use smaller brew size (e.g., 6 oz) with same pod.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Empty drip tray and used pod holder.
Weekly: Wash removable parts (reservoir, drip tray) with warm, soapy water.
Monthly: Descale brewer using Keurig Descaling Solution or white vinegar solution.
Exterior: Wipe with damp cloth; do not immerse in water.

Descaling Procedure: Fill reservoir with descaling solution and water, run brew cycles without pod until reservoir empty, then rinse with fresh water cycles.

Programming Settings

Auto-Off: Press and hold BREW SIZE button for 3 seconds until light flashes. Press BREW button to cycle through options (0, 2, 4, 5 hours). Press POWER to save.

Brew Size Default: Last selected size is remembered for next brew.

Care & Storage

Unplug and empty water reservoir before storing. Store in a cool, dry place.

CAUTION! Never store with water in reservoir to prevent mold or mineral buildup.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed. Energy Star certified. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check power cord connection; ensure outlet works.
No water flow	Clogged needle/air lock	Descale brewer; prime system with water cycles.
Brew is weak or small	Mineral buildup	Descale brewer; check brew size selection.
Brewer leaks	Loose reservoir/overfilled	Ensure reservoir seated properly; do not exceed fill line.
Add Water light on (but reservoir full)	Float stuck	Remove reservoir, check float moves freely, reinstall.
Pod not punctured	Handle not closed fully	Open and close handle firmly until click.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com