Keurig Coffee Makers 2.0

Owner's Manual & Setup Guide

2.0 Series

Installation Guide

Tools Needed:

  • Clean cloth
  • Measuring cup
  • Fresh water
  • Keurig® descaling solution
  • Paper clip (for needle cleaning)

Step-by-Step Setup

  1. Choose Installation Location: Place on a flat, stable surface near an electrical outlet and away from heat sources or water splashes.
  2. Remove Packaging Materials: Remove all protective tapes, stickers, and packaging from the coffee maker.
  3. Water Reservoir Setup: Fill the removable water reservoir with fresh, cold water. Do not exceed MAX fill line.
  4. Initial Rinse: Run several brew cycles without a K-Cup® pod to rinse the internal system. Discard water.
  5. Electrical Connection: Plug into a properly grounded 120V, 60Hz outlet. Do not use an extension cord.
  6. First Brew Setup: Insert a K-Cup® pod, place a mug on the drip tray, and select your desired cup size.
  7. Test Run: Complete a brew cycle to ensure proper operation and check for leaks.
Warning: For optimal performance and safety, follow all setup instructions carefully. Use only Keurig® approved accessories.

Specifications

Model Series K-Classic 2.0, K-Elite 2.0, K-Select 2.0
Type Single Serve Coffee Maker
Color Options Black, White, Stainless Steel, Red
Water Reservoir Capacity 40 oz - 75 oz (varies by model)
Brew Sizes 4 oz, 6 oz, 8 oz, 10 oz, 12 oz
Control Type Button Controls with LCD Display
Power Requirements 120V, 60Hz, 1470W
Dimensions (HxWxD) 12.5 x 10.2 x 13.0 inches
Weight 7.5 - 9.5 lbs (varies by model)
Brew Time Under 1 minute
Temperature Range 187°F - 192°F
Pressure Optimal 9 Bars

Warranty Information

  • Full Warranty: 1 year limited warranty
  • Additional Coverage: Optional Keurig® Protection Plan available
  • Support: 24/7 customer service and online resources

For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com

Key Features

Multi-Stream Technology

Innovative showerhead design evenly saturates K-Cup® pods, extracting full flavor and aroma from every roast for a more delicious cup.

Strong Brew Button

Delivers an extra bold cup of coffee by slowing the brewing process, allowing more time for water to interact with coffee grounds.

Iced Coffee Setting

Specialty setting brews coffee at a stronger concentration over ice, preventing dilution while maintaining rich flavor.

Programmable Auto On/Off

Set your coffee maker to turn on and off automatically, saving energy and ensuring your coffee is ready when you are.

Large Water Reservoir

Removable 75 oz reservoir allows for multiple brews without frequent refills, with easy-fill handle and viewing window.

Energy Saving Mode

Automatically enters energy saving mode after 2 hours of inactivity, reducing power consumption by over 90%.

Brew Size Options Explained

4 oz

Perfect for espresso-style shots or small servings

6 oz

Standard cup size for balanced flavor

8 oz

Classic mug size for morning coffee

10 oz

Travel mug size for on-the-go brewing

12 oz

Large mug setting for extra coffee

Iced

Specialty setting for perfect iced coffee

Troubleshooting

Problem Possible Cause Solution
Coffee maker won't turn on Power issue, not plugged in properly Check power supply, ensure plug is secure, check outlet
Weak or no coffee flow Clogged needle, mineral buildup Clean exit needle with paper clip, descale machine
Machine not brewing full cup Water reservoir not seated, air bubble Remove and reseat water reservoir, check for air locks
Leaking water K-Cup® not punctured properly, seal issue Ensure K-Cup® is properly seated, check funnel seal
Error lights flashing Descale needed, overheating Run descaling cycle, let machine cool for 1 hour
Coffee tastes weak or bitter Wrong brew size, old K-Cup® pods Adjust brew size, use fresh K-Cup® pods, clean machine

Error Codes & Lights

  • Add Water: Water reservoir empty or not detected - Refill and reseat reservoir
  • Descale: Mineral buildup detected - Run descaling cycle
  • Overheating: Machine too hot - Unplug and let cool for 1 hour
  • Prime: First use or after descaling - Run water-only brew cycles
  • Not Ready: Brewing system not ready - Wait for ready light
  • Clogged: Needle or system clogged - Clean exit needle and run rinse cycle

Manual Downloads

Current 2.0 Series Manuals

K-Classic 2.0

Essential Single Serve

K-Elite 2.0

Premium Coffee Maker

K-Select 2.0

Customizable Brewing

K-Duo 2.0

Single Serve & Carafe

Popular Previous Models

K-Classic

Original Series

K-Elite

First Generation Elite

K-Select

Select Series

K-Mini

Compact Model

Note: For models not listed here, please visit the Keurig Support Website for complete documentation.