Keurig Coffee Maker Model B70 Manual

The Keurig B70 is a single-serve coffee brewing system featuring programmable settings, multiple cup sizes, a large removable water reservoir, an energy-saving auto-off function, a digital display, and a descaling alert. It is compatible with most K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew head, Removable water reservoir, Drip tray, Digital display, Control panel, Power button.

Installation & Setup

Unpack and inspect contents. Place on a stable, level surface.

1. Remove all packaging materials from inside and outside the brewer.
2. Wash the water reservoir with warm, soapy water; rinse thoroughly.
3. Fill the reservoir with fresh water and place it onto the brewer.
4. Plug the power cord into a 120V AC outlet.
5. Prime the brewer before first use (see First-Time Use).

WARNING! Do not use the brewer without water. Ensure the brewer is unplugged during cleaning.

First-Time Use

Power on the brewer; follow priming steps.

1. Press the POWER button to turn on the brewer.
2. Lift and lower the brew handle without a K-Cup pod.
3. Place a large mug (at least 10 oz) on the drip tray.
4. Select the largest cup size and press BREW.
5. Repeat the brewing cycle 2-3 times with fresh water to prime.
6. After priming, the brewer is ready for use with K-Cup pods.

CAUTION! Use only recommended water; do not use distilled water.

Specifications

• Model: Keurig B70.
• Power: 120V AC, 60Hz, 1470W.
• Water Reservoir: 48 oz removable.
• Cup Sizes: 6 oz, 8 oz, 10 oz programmable.
• Dimensions: 13.5" H x 10.2" W x 13.2" D.
• Weight: 9.5 lbs.
• Display: Digital LCD.
• Auto-Off: 2 hours (adjustable).
• Compatibility: Most K-Cup pods.
• Warranty: 1-year limited.

Controls and Settings

Access settings via the digital display and control panel.

Control Panel: POWER, BREW, CUP SIZE (SMALL, MEDIUM, LARGE), BREW STRENGTH, HOT WATER, MENU/SETTINGS.

Settings: Program cup size, set brew strength (regular/strong), set auto-off time (2 hrs, 4 hrs, off), set clock, descale alert, factory reset.

Brewing Coffee

Use with most K-Cup pods.

1. Press POWER to turn on the brewer; wait for READY light.
2. Lift the brew handle and insert a K-Cup pod; close the handle.
3. Place a mug on the drip tray.
4. Select cup size (SMALL, MEDIUM, LARGE) and press BREW.
5. Brewing begins; coffee dispenses into the mug.
6. After brewing, lift the handle to eject the used pod.
7. For hot water, press HOT WATER without a K-Cup.

Tip: Preheat your mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Unplug the brewer and allow it to cool.
2. Remove and wash the water reservoir, lid, and drip tray with warm, soapy water.
3. Wipe the exterior with a damp cloth; do not immerse in water.
4. Clean the brew needle monthly: use a paper clip to clear any clogs (unplug first).
5. Descale every 3-6 months or when the descale alert appears.

CAUTION! Never use vinegar to descale; use Keurig descaling solution or approved descaler.

Descaling Procedure

Descale when the alert appears or every 3-6 months.

1. Fill the water reservoir with 48 oz of water and Keurig descaling solution.
2. Place a large mug on the drip tray.
3. Press MENU, navigate to DESCALING, and press OK.
4. Follow on-screen prompts: brew until reservoir is empty.
5. Refill the reservoir with fresh water and repeat brewing cycles to rinse.
6. After rinsing, the descaling process is complete.

WARNING! Do not skip rinsing cycles; residual solution can affect taste.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com