Installation Guide
Tools Needed:
- Clean microfiber cloth
- Vinegar or descaling solution
- Clean water
- Cotton swabs
- Small brush
Step-by-Step Setup
- Choose Installation Location: Place on a flat, stable surface near an electrical outlet and away from heat sources.
- Remove Packaging Materials: Remove all protective films and packaging materials from the coffee maker.
- Water Reservoir Setup: Fill the water reservoir with fresh, cold water. Do not exceed maximum fill line.
- Initial Cleaning: Run several brewing cycles with clean water only to flush the system before first use.
- Electrical Connection: Plug into a properly grounded 120V, 60Hz outlet. Do not use an extension cord.
- K-Cup Pod Holder: Insert the K-Cup pod holder and ensure it clicks into place properly.
- Test Run: Run a brewing cycle without a K-Cup to ensure proper water flow and heating.
Specifications
| Model Series | K-Classic, K-Elite, K-Select |
| Type | Single Serve Coffee Maker |
| Color Options | Black, White, Stainless Steel, Red |
| Water Reservoir Capacity | 40 oz - 75 oz (depending on model) |
| Brew Sizes | 6 oz, 8 oz, 10 oz, 12 oz |
| Control Type | Button Controls with LED Display |
| Power Requirements | 120V, 60Hz, 1470W |
| Dimensions (HxWxD) | 13.2 x 10.5 x 13.0 inches |
| Weight | 7.5 lbs |
| Brew Time | Less than 1 minute |
| Temperature Range | 187°F - 192°F |
| Pressure | Optimal 9-bar pressure |
Warranty Information
- Full Warranty: 1 year limited warranty
- Additional Coverage: Optional extended warranty available
- K-Cup Holder Warranty: 2 years on brew assembly
For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com
Key Features
Single Serve Technology
Brews a perfect cup of coffee, tea, or hot cocoa in under a minute using patented K-Cup pod technology for consistent results every time.
Multiple Brew Sizes
Choose from 4 different brew sizes (6oz, 8oz, 10oz, 12oz) to customize your beverage strength and volume according to your preference.
Energy Saving Auto-Off
Automatically turns off 90 seconds after brewing to save energy, with options to extend to 5 minutes or disable completely.
Strong Brew Option
Delivers a bolder, more robust cup of coffee by slowing the brew cycle to increase extraction time and flavor intensity.
Hot Water on Demand
Provides hot water for tea, oatmeal, soup, or other instant foods without needing to brew a beverage.
Removable Water Reservoir
Easy-fill, removable 75oz water reservoir with handle for convenient refilling and cleaning.
Maintenance Features Explained
Descaling Alert
Automatic notification when descaling is required to maintain optimal performance and coffee quality
Needle Cleaning Tool
Included tool for clearing clogged needles to ensure proper water flow through K-Cup pods
Drip Tray Removal
Removable drip tray with adjustable height to accommodate various cup sizes and easy cleaning
Water Filter Compatibility
Compatible with Keurig water filters to reduce chlorine taste and odor while protecting the machine
Brew Chamber Access
Easy access to brew chamber for thorough cleaning and maintenance of internal components
Reservoir Cleaning
Removable reservoir designed for easy cleaning to prevent mineral buildup and bacteria growth
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee maker won't turn on | Power issue, not plugged in properly | Check power supply, ensure plug is secure in outlet |
| Weak or no coffee flow | Clogged needles, mineral buildup | Clean exit needle, descale the machine |
| Machine not brewing full cup | Water reservoir empty, air in line | Refill water reservoir, run several cycles to clear air |
| Leaking water | Improper K-Cup insertion, worn seals | Ensure K-Cup is properly seated, check and replace seals if needed |
| Unusual noises | Air in pump, mineral buildup | Run several water-only cycles, descale the machine |
| Error lights flashing | Descaling needed, overheating | Descale immediately, allow to cool for 30 minutes |
Error Codes & Lights
- Add Water Light: Water reservoir empty or not properly seated
- Descale Light: Mineral buildup detected - descaling required
- Prime Light: Air in system - run several water-only cycles
- Overheating Light: Machine too hot - unplug and allow to cool for 30 minutes
- Brew Button Flashing: K-Cup not detected or improperly inserted
- All Lights Flashing: System error - unplug for 2 minutes, then restart
Manual Downloads
Current Model Manuals
K-Classic K50
Single Serve Coffee Maker
K-Elite K90
Single Serve Coffee Maker
K-Select K150
Single Serve Coffee Maker
K-Duo Plus
Single Serve & Carafe Coffee Maker
Popular Previous Models
K200
Single Serve Coffee Maker
K425
Single Serve Coffee Maker
K550
Office Pro Commercial Brewer
K155
Office Pro Commercial Brewer