Keurig Coffee Machine User Manual

User Manual & Installation Guide

K-Classic & K-Elite Series

Installation Guide

Tools Needed:

  • Clean cloth
  • Measuring cup
  • Vinegar (for descaling)
  • Filtered water
  • Keurig compatible coffee pods

Step-by-Step Setup

  1. Unpack and Place Machine: Remove all packaging materials and place the machine on a flat, stable surface away from heat sources.
  2. Wash Removable Parts: Wash the water reservoir, drip tray, and K-cup holder with warm, soapy water and rinse thoroughly.
  3. Fill Water Reservoir: Fill the reservoir with fresh, filtered water up to the maximum fill line.
  4. Prime the Machine: Plug in the machine and run 3-4 brew cycles without a K-cup to flush the system.
  5. Insert K-Cup: Lift the handle, insert a Keurig compatible coffee pod, and close the handle firmly.
  6. Select Cup Size: Choose your desired brew size using the control buttons.
  7. Start Brewing: Press the brew button and wait for the cycle to complete.
Warning: Never use distilled water. Always use filtered or spring water to prevent mineral buildup and maintain optimal performance.

Specifications

Model Series K-Classic, K-Elite, K-Select
Type Single Serve Coffee Maker
Color Options Black, White, Stainless Steel, Red
Water Reservoir Capacity 40 oz - 75 oz
Brew Sizes 6 oz, 8 oz, 10 oz, 12 oz
Control Type Button Controls with LED Display
Brew Time Under 1 minute
Power Requirements 120V, 60Hz, 1470W
Dimensions (HxWxD) 13.3 x 10.2 x 13.0 inches
Weight 9.5 lbs
Compatibility All Keurig K-Cup pods
Energy Saving Mode Auto-off after 2 hours

Warranty Information

  • Full Warranty: 1 year limited warranty
  • Additional Coverage: Optional extended warranty available
  • Support: 24/7 customer service hotline

For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com

Key Features

Keurig Brewing System

Patented brewing technology that delivers consistent, great-tasting coffee every time by precisely controlling temperature, pressure, and brew time.

Multi-Stream Technology

Innovative needle system that punctures the K-Cup pod in multiple places, saturating the grounds evenly for optimal flavor extraction.

Strong Brew Option

Increases the strength and boldness of your coffee by slowing down the brewing process for richer flavor extraction.

Iced Coffee Setting

Specialty setting that brews coffee at a lower temperature and higher concentration, perfect for making iced coffee without dilution.

Programmable Auto-Off

Energy-saving feature that automatically turns off the machine after 2 hours of inactivity, helping to reduce power consumption.

Large Water Reservoir

Removable 75 oz reservoir allows for multiple brews without frequent refilling, with easy-fill handle and water window.

Beverage Options Explained

Hot Coffee

Perfect brewing temperature of 192°F for optimal coffee extraction

Hot Cocoa

Special setting for hot chocolate and other powdered beverages

Tea

Gentle brewing for tea pods with precise temperature control

Iced Coffee

Concentrated brew specifically designed for iced beverages

Strong Brew

25% stronger coffee for those who prefer bold flavor

Hot Water

Instant hot water for soups, oatmeal, or tea bags

Troubleshooting

Problem Possible Cause Solution
Machine won't turn on Power issue, not plugged in properly Check power outlet, ensure plug is secure, check circuit breaker
Weak or no coffee flow Clogged needle, mineral buildup Clean brewing needle, descale machine with vinegar solution
Coffee tastes weak Wrong brew size, old K-Cup pods Use smaller cup size, ensure fresh pods, use Strong Brew setting
Leaking water Overfilled reservoir, cracked parts Don't exceed max fill line, check reservoir and seals for damage
Machine not brewing full cup Air in water line, clogged filter Prime machine, clean water filter, check for obstructions
Error lights flashing Descale needed, overheating Descale immediately, let machine cool for 30 minutes

Error Codes & Lights

  • Add Water: Water reservoir is empty or not properly seated
  • Descale: Mineral buildup detected - run descaling cycle
  • Prime: Air in system - run water-only brew cycles
  • Overheat: Machine too hot - unplug and let cool for 30 minutes
  • Not Ready: Brewing chamber open or not locked
  • Clogged: Needle obstruction - clean with paper clip

Manual Downloads

Current Model Manuals

K-Classic K50

Single Serve Coffee Maker

K-Elite K575

Premium Single Serve Brewer

K-Select K155

Smart Single Serve Machine

K-Duo Plus

Single Serve & Carafe Combo

Popular Previous Models

K45 Elite

Classic Series Brewer

K250

Basic Single Serve

K150

Compact Brewer

K-Cafe

Latte & Cappuccino Maker

Note: For models not listed here, please visit the Keurig Support Website for complete documentation.