Setup & Installation Guide
What's Included:
- Keurig coffee machine
- Water filter handle
- Charcoal water filter
- Drip tray
- Power cord
- Quick start guide
Step-by-Step Setup
- Unpack and Place: Remove all packaging materials and place the brewer on a clean, level, heat-resistant surface away from edges.
- Water Reservoir: Lift the handle and remove the water reservoir. Rinse thoroughly with clean water before first use.
- Install Water Filter: Soak the charcoal water filter for 5 minutes, then insert it into the filter handle and install in the reservoir.
- Fill with Water: Fill the reservoir with fresh, cold water up to the maximum fill line. Do not overfill.
- Power Connection: Plug the power cord into a 120V grounded electrical outlet. Ensure the outlet is easily accessible.
- Initial Setup: Place a large mug (minimum 10 oz) on the drip tray. The brewer will automatically prime during first use.
- First Brew: Run 3-4 cleansing brews without a K-Cup pod to clean the internal brewing system before first coffee brew.
Specifications
| Model Series | K-Elite / K-Classic / K-Select |
| Type | Single Serve Coffee Brewer |
| Color Options | Black, Stainless Steel, White, Red |
| Water Reservoir | 75 oz (removable) |
| Brew Sizes | 4 oz, 6 oz, 8 oz, 10 oz, 12 oz |
| Control Type | Button Controls with LCD Display |
| Power Requirements | 120V, 60Hz, 1470W |
| Dimensions (HxWxD) | 13.2 x 10.5 x 13.0 inches |
| Weight | 8.5 lbs |
| Brew Time | Under 1 minute |
| Temperature Range | 187°F - 192°F |
| Auto Off | Adjustable: 5 min to 2 hours |
Warranty Information
- Limited Warranty: 1 year from date of purchase
- Water Filter Warranty: 90 days
- Extended Coverage: Optional protection plans available
For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com
Key Features
K-Cup Pod System
Brews over 400 varieties of coffee, tea, hot cocoa, and specialty beverages using patented K-Cup pods. Each pod is individually sealed for freshness.
Multi-Stream Technology
Extracts full flavor and aroma from the K-Cup pod by injecting hot water through multiple points, ensuring optimal saturation and consistent brewing.
Strong Brew Button
Delivers a bolder, more intense cup of coffee by slowing the brewing process to increase contact time between water and coffee grounds.
Iced Coffee Setting
Specialty setting brews coffee at a higher concentration over ice, preventing dilution and delivering perfect iced coffee every time.
Programmable Auto On/Off
Set your brewer to turn on at a specific time and automatically shut off after brewing to save energy and ensure coffee is ready when you are.
Hot Water on Demand
Dispense hot water for tea, oatmeal, soup, or other hot beverages without brewing a K-Cup pod, providing versatile kitchen functionality.
Brew Size Options Explained
4 oz Cup
Perfect for espresso-style drinks or strong coffee concentrate
6 oz Cup
Standard coffee cup size for balanced flavor and strength
8 oz Cup
Mug size for a satisfying morning coffee experience
10 oz Cup
Travel mug size for larger servings on the go
12 oz Cup
Maximum brew size for extra-large mugs and tumblers
Custom Brew
Program your preferred brew size for personalized servings
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer won't turn on | Power issue, not plugged in, outlet problem | Check power connection, try different outlet, ensure power switch is on |
| Weak or no coffee flow | Clogged needle, mineral buildup, pod issue | Clean exit needle, descale brewer, try different K-Cup pod |
| Brewer not heating | Mineral scale buildup, heating element issue | Descale brewer, contact customer service if problem persists |
| Leaking water | Overfilled reservoir, cracked reservoir, loose connection | Check fill level, inspect reservoir for cracks, ensure proper seating |
| Error message on display | Various system errors, sensor issues | Unplug for 2 minutes, plug back in, check manual for specific error codes |
| Inconsistent brew temperature | Mineral buildup, need to descale, ambient temperature | Descale brewer, ensure room temperature above 60°F, preheat mug |
Common Error Codes
- Add Water: Water reservoir is empty or not properly seated
- Descale: Mineral buildup detected - needs descaling
- Prime: Brewer needs priming - run water through without pod
- Overheat: Brewer too hot - unplug and let cool for 30 minutes
- Not Ready: Brewer still heating - wait for ready light
- Contact CS: Technical issue - contact customer service
Manual Downloads
Current Model Manuals
K-Elite
Single Serve Coffee Maker
K-Classic
Essential Coffee Brewer
K-Select
Customizable Coffee Maker
K-Slim
Compact Coffee Machine
Popular Previous Models
K-55
Classic Series Brewer
K-425
Platinum Edition
K-250
Special Edition
K-145
Office Pro Series