Keurig 2.0 Owners Manual

The Keurig 2.0 is a single-serve coffee brewing system designed for convenience and variety. It features compatibility with a wide range of K-Cup pods, including the new K-Carafe pods for full carafes of coffee, an intuitive color touch display, programmable settings, auto on/off, a large removable water reservoir, a descaling reminder, and brew strength control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewer with color touch display, Removable Water Reservoir, Drip Tray, K-Cup Pod Holder, K-Carafe compatibility, Power Cord.

Feature	Description
Color Touch Display	Interactive screen for selecting brew size and settings
Multi-Size Brewing	Brews 4 oz., 6 oz., 8 oz., 10 oz., 12 oz. cups and full Carafe
K-Carafe Compatibility	Uses special K-Carafe pods to brew a full carafe (up to 30 oz.)
Removable Water Reservoir	Holds up to 80 oz. of water for easy filling and cleaning
Programmable Auto On/Off	Set brew time and automatic shut-off
Brew Strength Control	Selects regular or strong brew for most K-Cup pods
Descaling Reminder	Display alert when descaling is needed
Energy Saver Mode	Reduces energy consumption when not in use
Drip Tray	Removable tray accommodates various cup sizes
Power Button	Turns brewer on/off

Unpacking and Setup

Unpack and inspect all contents. Place brewer on a stable, level, and dry countertop.

1. Remove all packaging materials and stickers from brewer and water reservoir.
2. Wash removable parts: Wash water reservoir and drip tray with warm, soapy water. Rinse and dry.
3. Fill reservoir: Place reservoir in position and fill with fresh, cold water to desired level.
4. Plug into a dedicated 120V AC outlet.
5. Prime the brewer: Follow first-time use instructions to run water through the system.

WARNING! Place away from heat sources and edges. Ensure cord is not pinched or damaged.

First-Time Use

Power on brewer; follow on-screen prompts.

1. Initial Setup: Plug in. The display will light up. Press the POWER button.
2. Priming: The brewer will prompt you to run a cleansing brew. Place a large mug on the drip tray and follow instructions to brew a full reservoir of water without a K-Cup pod.
3. Select Language: Use the touch display to set your preferred language (default is ENGLISH).
4. Set Time: Program the current time for auto on/off features.
5. Brew First Cup: Insert a K-Cup pod, select your cup size, and press BREW.

CAUTION! Use only clean, cold water. Do not use distilled water. The first few brews may have a slight taste—this is normal.

Specifications

• Model: Keurig 2.0 Series.
• Power: 120V AC, 60Hz, 1470W.
• Water Reservoir Capacity: 80 oz. removable.
• Brew Sizes: 4 oz., 6 oz., 8 oz., 10 oz., 12 oz., and Carafe (up to 30 oz.).
• Pod Compatibility: Most K-Cup pods and K-Carafe pods. Uses Keurig 2.0 Brewing Technology.
• Display: Full-color touch screen.
• Dimensions: Varies by model.
• Weight: Varies by model.
• Warranty: Limited 1-year warranty.

Controls and Display

Access all functions via the color touch display. Physical Buttons: POWER, BREW (for manual start).

Touch Display Icons: Power, Cup Size Selection (4oz-12oz, Carafe), Strength (Regular/Strong), Settings Menu, Clock, Auto On/Off.

Settings Menu: Language, Time, Auto On (set time to turn on), Auto Off (set delay for automatic shut-off from 5 min to 2 hours), Temperature Control (adjust brew temp), Descaling Mode, Factory Reset. Display messages indicate ready, heating, brewing, add water, and descale alerts.

Brewing Coffee

For use with approved K-Cup pods.

1. Power On: Press POWER button. Wait for "Ready" message.
2. Lift Handle: Open the K-Cup pod holder by lifting the handle.
3. Insert Pod: Place a K-Cup pod into the holder. Close handle firmly.
4. Place Cup: Set a mug (min. 4 oz.) on the drip tray.
5. Select Size & Strength: On display, touch desired cup size. Touch STRENGTH for Regular or Strong.
6. Brew: Touch BREW button. Brewing begins and completes automatically.
7. Remove Pod: After brewing, lift handle to eject used pod into the compartment.

Tip: Preheat your mug with hot water for a hotter beverage. Do not use pods that are damaged.

Using the K-Carafe

Requires a Keurig 2.0 compatible K-Carafe pod and the included or purchased Keurig Carafe.

1. Ensure brewer is on and ready.
2. Lift handle and insert a K-Carafe pod. Close handle.
3. Place the empty carafe on the drip tray (drip tray may need to be in its lower position).
4. On display, select the CARAFE icon.
5. Select brew size: Choose between 22 oz., 26 oz., or 30 oz.
6. Touch BREW. The brewer will dispense the selected amount into the carafe.
7. When finished, lift handle to eject the used pod.

WARNING! Always use the official Keurig Carafe. The carafe and coffee will be hot. Use handle.

Customization & Settings

Access Settings via the gear icon on the touch display.

Programmable Auto On: Set a time for the brewer to turn on and be ready.

Programmable Auto Off: Set delay (5 min to 2 hrs) for brewer to turn off after last brew.

Temperature Control: Adjust brew temperature within a range.

Default Brew Size: Set your most-used cup size as the default.

Language: Change display language.

Factory Reset: Restores all settings to original defaults.

Cleaning & Descaling

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and water reservoir.

Weekly: Wash removable reservoir and drip tray in warm, soapy water. Clean the pod holder assembly with a damp cloth.

Descaling: Required every 3-6 months or when the DESCALE alert appears. Use only Keurig Descaling Solution or approved vinegar solution. Follow the descaling instructions in the Settings menu.

CAUTION! Unplug before cleaning exterior. Never immerse brewer in water. Use only recommended descaling solution.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. Keurig, K-Cup, K-Carafe, and Keurig 2.0 are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact Keurig Customer Service at 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power cord/outlet	Ensure cord is plugged in securely. Try a different outlet.
No water flow / small brew	Clogged needle/reservoir	Descale brewer. Check water reservoir is seated and full. Clean exit needle with a paperclip.
Display shows "Add Water"	Low water level	Fill water reservoir above minimum line.
Display shows "Descale"	Mineral buildup	Perform descaling procedure immediately.
Coffee not hot enough	Settings/cold mug	Check temperature setting in menu. Preheat your mug.
Carafe not recognized	Placement/sensor	Ensure carafe is centered on tray. Clean carafe sensor with a dry cloth.
Pod holder hard to close	Pod/obstruction	Ensure correct pod is used and inserted fully. Check for obstructions.

Reset: Unplug for 2 minutes, then plug back in. Or use Factory Reset in Settings.

Service: 1-866-901-2739; www.keurig.com