Keurig 2.0 Manual K200

The Keurig 2.0 K200 is a single-serve coffee brewer designed for home use, featuring compatibility with K-Cup® and K-Mug® pods, a 40 oz. removable water reservoir, programmable auto on/off, a large color touch display, brew strength control, and a descale reminder. It brews cup sizes from 4 oz. to 12 oz. for K-Cup pods and up to 30 oz. for K-Mug pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Display 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with color touch display, Removable water reservoir, Drip tray, K-Cup® pod holder, Power cord.

Feature	Description
Color Touch Display	Interactive screen for selecting brew options
Removable Water Reservoir	40 oz. capacity, easy to fill and clean
Multi-Size Brewing	Brews 4, 6, 8, 10, 12 oz. (K-Cup) & up to 30 oz. (K-Mug)
Brew Strength Control	Select Strong or regular brew strength
Programmable Auto On/Off	Set brewer to turn on/off automatically
Descale Reminder	Display alerts when descaling is needed
K-Cup & K-Mug Compatibility	Works with most Keurig branded pods (2.0 system)
Drip Tray	Removable for cleaning, accommodates travel mugs
Energy Saver Mode	Automatically enters low-power mode after brewing
Hot Water on Demand	Dispense hot water without a pod for other beverages

Installation & Setup

Unpack and inspect all contents. Place brewer on a stable, level, and dry surface away from heat sources and sinks.

Remove all packaging materials from inside and outside the brewer.
Wash the removable water reservoir and lid with warm, soapy water. Rinse thoroughly.
Place the drip tray in position. Ensure the water reservoir is correctly seated.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Ensure the water reservoir is filled before first use.

First-Time Use

Prime the brewer before first brew to ensure optimal performance.

Fill the water reservoir with fresh, cold water to the MAX fill line.
Power on the brewer by pressing the Power button. The display will illuminate.
Without inserting a pod, place a mug (at least 10 oz.) on the drip tray.
Select the largest cup size (12 oz.) and press BREW. Allow the full cycle to complete. Discard this water.
Repeat this priming process 2-3 times to flush the system.

CAUTION! The water and brewer will become hot. Do not touch during the priming cycle.

Specifications

Model: K200 Series.
Power: 120V AC, 60Hz, 1470W.
Water Reservoir: 40 oz. removable.
Brew Sizes: 4, 6, 8, 10, 12 oz. (K-Cup); 14, 16, 18, 20, 22, 24, 26, 28, 30 oz. (K-Mug).
Dimensions (HxWxD): Approx. 13.0" x 9.8" x 13.3".
Weight: Approx. 7.5 lbs.
Display: Full-color touch screen.
Compatibility: Keurig 2.0 K-Cup® & K-Mug® pods.
Warranty: 1-Year Limited Warranty.

Controls and Display

Access all functions via the color touch display. Physical Button: POWER.

Touch Display Options: Power, Brew Size Selection, Strength (Strong), Hot Water, Auto On/Off Settings, Menu (for descale reminder, factory reset, etc.).

Brew Size: Tap the desired cup size icon on the screen. Strength Control: Tap the 'Strong' icon for a bolder brew. Auto On/Off: Set a daily schedule for the brewer to turn on/off automatically. Menu: Access settings like descale reminder, display brightness, and system info.

Brewing Coffee

Brews coffee, tea, hot cocoa, and other beverages using Keurig pods.

Power on: Press the POWER button. Wait for the READY message.
Fill the water reservoir with cold water.
Lift and lower the handle to open the pod holder. Insert a compatible K-Cup or K-Mug pod.
Close the handle firmly.
Place a mug or carafe on the drip tray.
On the display, select your desired brew size (e.g., 8 oz.).
Optional: Tap the 'Strong' icon for a bolder cup.
Tap the large BREW button to start the cycle.
When brewing is complete, lift the handle to eject the used pod.

Tip: For Hot Water, select the 'Hot Water' option on the screen instead of inserting a pod.

Maintenance & Cleaning

Regular cleaning ensures great taste and extends brewer life.

Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.
Water Reservoir & Lid: Wash weekly with warm, soapy water. Rinse thoroughly.
Drip Tray & Pod Holder: Remove and wash regularly. The pod holder assembly can be rinsed under warm water.
Needle: If clogged, use a paper clip to gently clear the entry and exit needles (brewer unplugged and cool).

CAUTION! Unplug the brewer and allow it to cool completely before cleaning any internal parts.

Descaling

Mineral buildup from water requires periodic descaling. The display will show a reminder.

Purchase Keurig Descaling Solution or approved white vinegar.
Fill the empty water reservoir with 16 oz. of descaling solution and 16 oz. of water.
Place a large mug (at least 20 oz.) on the drip tray.
From the MENU on the display, select 'Descale' to start the process.
The brewer will guide you through multiple brew cycles without a pod. Follow on-screen prompts.
After the solution is used, rinse the reservoir thoroughly and fill with fresh water.
Complete multiple brew cycles with just water to rinse the internal system.

WARNING! Descaling solution/vinegar is not for consumption. Ensure thorough rinsing.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig®, K-Cup®, K-Mug® are registered trademarks. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	No power	Check that the power cord is plugged in securely; try a different outlet.
No water flow / small cup	Clogged needle or water lines	Descale the brewer; check and clear needles (when cool).
Display shows "Add Water"	Empty reservoir	Fill the water reservoir with fresh, cold water.
Pod not punctured	Handle not closed fully	Open and firmly re-close the handle.
Leaking water	Improper pod placement / overfilled reservoir	Ensure pod is seated correctly; do not fill reservoir past MAX line.
Coffee not hot enough	Cold mug / system needs heating	Pre-warm mug with hot water; ensure brewer has completed its pre-heat cycle.
Descale reminder won't clear	Descaling process incomplete	Complete the full descaling procedure as outlined in the manual.

Reset: From the MENU on the display, select 'Factory Reset' if available.

Service: 1-866-901-2739; www.keurig.com