Keurig 2.0 K200 Manual

The Keurig 2.0 K200 is a single-serve coffee maker designed for home use, featuring compatibility with K-Cup pods and K-Carafe pods, a 40oz removable water reservoir, a 4-inch color touch screen display, programmable auto on/off, brew strength control, temperature control, and descale alert. It brews cup sizes from 4oz to 30oz and includes a carafe setting for multi-cup brewing. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Guide 7. Maintenance & Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Color Touch Screen, Removable Water Reservoir, Drip Tray, K-Cup Pod Holder, K-Carafe Pod Holder, Power Button, Brew Button.

Feature	Description
Color Touch Screen	4-inch display for selecting brew options and settings
Removable Water Reservoir	40oz capacity with handle for easy filling
K-Cup & K-Carafe Compatibility	Brews single cups (4-12oz) and carafes (22-30oz)
Brew Strength Control	Adjustable strength (Strong, Medium, Light)
Temperature Control	Adjustable brew temperature (187°F - 192°F)
Programmable Auto On/Off	Set brew time and auto shut-off (2hr default)
Descale Alert	Indicator light prompts for descaling
Drip Tray	Removable tray with height adjustment
Energy Saver Mode	Reduces power consumption when idle
Quiet Brew Technology	Reduced noise during brewing

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove packaging materials and stickers.
Wash removable parts: Reservoir, drip tray, and K-Cup holder with warm soapy water.
Place brewer on counter away from edges, cabinets, and heat sources.
Fill reservoir with fresh cold water and insert into brewer.
Plug into 120V AC outlet.

WARNING! Do not use without water. Ensure drip tray is in place before brewing.

First-Time Use

Power on brewer; follow on-screen prompts.

Initial Setup: Touch screen to begin. Select language (ENGLISH default).
Prime Brewing System: Brewer will run water through system (no pod). Discard first brew.
Set Preferences: Program auto on/off time, default cup size, and temperature.
Insert Pod: Lift handle, place K-Cup or K-Carafe pod in holder, close firmly.
Brew: Select cup size on screen and press BREW.

CAUTION! Do not touch hot surfaces during or immediately after brewing.

Specifications

Dimensions: 10.5" W x 13.2" H x 13.5" D.
Water Reservoir: 40oz removable.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 4, 6, 8, 10, 12oz (cup); 22, 26, 30oz (carafe).
Brew Time: Under 1 minute for most sizes.
Pod Compatibility: Keurig 2.0 K-Cup pods and K-Carafe pods.
Display: 4-inch color touch screen.
Warranty: 1-year limited.
Weight: 8.5 lbs.

Controls and Settings

Access menu via touch screen. Physical Buttons: POWER, BREW.

Touch Screen Menu: Brew Size, Strength Control, Temperature Control, Auto On/Off, Settings, Descaling, Energy Saver.

Brew Size: Select cup (4-12oz) or carafe (22-30oz). Strength: Adjust brew strength (Strong, Medium, Light). Temperature: Set brew temp (187°F - 192°F). Auto On/Off: Program start time and auto shut-off (off, 30min, 1hr, 2hr). Settings: Language, screen brightness, sound on/off. Descaling: Initiate descale mode when prompted. Energy Saver: Enable/disable power save.

Brewing Guide

Supports K-Cup pods (single serve) and K-Carafe pods (multi-serve).

Lift handle to open pod holder.
Insert compatible pod (K-Cup or K-Carafe).
Close handle firmly until it clicks.
Place cup or carafe on drip tray.
On touch screen, select brew size and any options (strength, temp).
Press BREW button to start.
Brewing completes automatically; remove beverage.
Eject used pod by lifting handle.

Tip: Use filtered water for better taste and to reduce mineral buildup.

Maintenance & Cleaning

Daily: Wipe exterior with damp cloth. Weekly: Clean water reservoir, drip tray, and pod holder.

Unplug brewer and let cool.
Remove and wash reservoir, drip tray, and funnel with warm soapy water.
Rinse thoroughly and dry before reassembling.
Wipe touch screen with soft, dry cloth.
Check needle for clogs; use paperclip to clear if needed (unplug first).

CAUTION! Do not immerse brewer in water. Never use abrasive cleaners.

Descaling

Descale alert appears when mineral buildup is detected.

Purchase Keurig Descaling Solution or use vinegar solution.
Fill reservoir with descaling solution and water (50/50 mix).
Place large cup on drip tray.
Enter Descaling mode via touch screen (Settings > Descaling).
Follow on-screen prompts to brew multiple cycles until reservoir empty.
Rinse reservoir, refill with fresh water, and run several brew cycles to flush.

WARNING! Descaling solution is acidic; avoid contact with skin and eyes.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Ensure plugged in; outlet working; power button pressed.
No water flow	Empty reservoir/clog	Refill reservoir; check for clogs in needle; descale.
Weak or no coffee	Pod not punctured	Ensure pod inserted correctly; handle closed fully.
Leaking water	Loose parts/reservoir	Check reservoir seated properly; drip tray in place.
Error message on screen	System error	Unplug for 2 minutes, then restart; refer to manual code.
Descale light on	Mineral buildup	Perform descaling procedure.
Carafe not recognized	Wrong pod/carafe	Use only K-Carafe pods with carafe setting; place carafe properly.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com