K Elite Keurig Manual

The K Elite Keurig is a single-serve coffee maker featuring multiple brew sizes, a strong brew option, an iced coffee setting, a 75 oz. removable water reservoir, a programmable auto-off function, a descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Iced Coffee Function 8. Maintenance & Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Drip tray, Control panel, Power base, K-Cup pod holder.

Feature	Description
Brew Sizes	4 oz, 6 oz, 8 oz, 10 oz, 12 oz
Strong Brew	Increases coffee strength for bolder flavor
Iced Coffee Setting	Brews over ice without dilution
Removable Reservoir	75 oz. capacity, easy to fill and clean
Programmable Auto-Off	Can be set to turn off after 2 hours
Descale Indicator	Alerts when descaling is needed
Multi-Stream Technology	Extracts full flavor and aroma from K-Cup pods
Hot Water on Demand	Dispenses hot water for tea, cocoa, etc.
Drip Tray	Removable and adjustable for tall mugs
Energy Saver Mode	Reduces energy consumption between brews

Installation & Setup

Unpack and inspect contents. Place on a clean, stable, level surface.

Remove all packaging materials from inside and outside the brewer.
Wash the removable water reservoir and drip tray with warm, soapy water. Rinse and dry.
Place the drip tray in position. Ensure the water reservoir is securely seated.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Ensure the water reservoir is filled before first use.

First-Time Use

Prime the system before first brew to ensure optimal performance.

Fill the water reservoir with fresh, cold water up to the MAX fill line.
Place a large mug (at least 10 oz) on the drip tray.
Lift and lower the brew handle without inserting a K-Cup pod to open and close the needle.
Select the largest brew size (12 oz) and press the brew button. Discard this water.
Repeat the priming process once more. The brewer is now ready for use.

CAUTION! The dispensed water will be hot. Keep hands and face clear.

Specifications

Dimensions: 13.0" H x 10.2" W x 13.0" D.
Water Reservoir: 75 oz. removable.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Brew Time: Under 1 minute.
Auto-Off: Programmable (off or 2 hours).
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.
Weight: 8.5 lbs.

Controls and Settings

Access functions via the illuminated touchscreen control panel.

Control Panel: POWER, Brew Size Buttons (4,6,8,10,12 oz), STRONG, ICED, HOT WATER, AUTO OFF.

Settings: Use the POWER button to turn the brewer on/off. Select brew size before each brew. The STRONG button light indicates when the stronger brew option is active. The ICED button prepares the brew for optimal iced coffee. HOT WATER dispenses hot water without a pod. Press and hold AUTO OFF for 3 seconds to toggle the 2-hour auto-off feature.

Brewing Coffee

Brews a perfect cup in under a minute.

Ensure the brewer is on and the water reservoir is filled.
Lift the handle and insert a K-Cup pod. Close the handle firmly.
Place a mug on the drip tray.
Select your desired brew size (4, 6, 8, 10, or 12 oz).
For a stronger cup, press the STRONG button before brewing.
Press the flashing brew button. The brew will begin.
When brewing is complete, lift the handle to eject the used pod.

Tip: For best results, use fresh, cold water and a clean mug.

Iced Coffee Function

Brews a concentrated coffee over ice without watering it down.

Fill a glass with ice to the top.
Lift the handle and insert a K-Cup pod. Close the handle.
Place the ice-filled glass on the drip tray.
Press the ICED button. The button will light up.
Select your desired brew size (recommended for full glass: 10 or 12 oz).
Press the brew button. The brewer will adjust the cycle for iced coffee.

WARNING! The glass will become hot. Use a heat-resistant glass or allow it to cool before handling.

Maintenance & Descaling

Regular cleaning ensures great taste and machine longevity.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray.

Weekly: Remove and wash the water reservoir and drip tray in warm, soapy water.

Descaling: The DESCALE light will illuminate when necessary. Use only Keurig Descaling Solution or approved white vinegar solution. Follow the descaling instructions in the separate care guide.

CAUTION! Unplug the brewer before cleaning. Never immerse the base, cord, or plug in water.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © Keurig Green Mountain, Inc. Keurig, K-Cup, and K Elite are trademarks of Keurig Green Mountain, Inc., registered in the U.S. and other countries. For support, visit support.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure the power cord is plugged in securely. Check the outlet.
No water dispensed	Empty reservoir/air lock	Fill the water reservoir. Run a brew cycle without a pod to clear air.
Brew is weak or incomplete	Clogged needle	Turn off, unplug, and clean the exit needle with a paperclip. Refer to manual.
DESCALE light is on	Mineral buildup	Perform the descaling procedure immediately.
Coffee leaks	Damaged K-Cup/improper handle closure	Ensure K-Cup is undamaged. Close the handle firmly until it clicks.
Brewer beeps but doesn't brew	Overheating	Unplug, wait 15 minutes for cooling, then plug back in.

Reset: Unplug the brewer for 2 minutes, then plug it back in.

Service: 1-866-901-2739; support.keurig.com